Sunday 8 February 2015

Changes in screen design leading to temperature trend biases

In the lab, temperature can be measured with amazing accuracies. Outside, exposed to the elements, measuring the temperature of the air is much harder. For example, if the temperature sensor gets wet, due to rain or dew, the evaporation leads to a cooling of the sensor. The largest cause of exposure errors are solar and heat radiation. For these reasons, thermometers need to be protected from the elements by a screen. Changes in the radiation error are an important source of non-climatic changes in station temperature data. Innovations leading to reductions in these errors are an major source of temperature trend biases.

A wall measurement at the Mathematical Tower in Kremsmünster. You mainly see the bright board to protect the instruments against rain, which is on the first floor, at the base of the window, a little right of the entrance.

History

The history of changes in exposure is different in every country, but in broad lines follows this pattern. In the beginning thermometers were installed in unheated rooms or in front of a window of an unheated room on the North (poleward) side of a building.

When this was found to lead to too high temperatures a period of innovation and diversity started. For example, small metal cages were added to the North wall measurements. More importantly free standing structures were designed: stands, shelters, houses and screens. In the Common Wealth the Glaisher (Greenwich) stand was prevalent. It has a vertical wooden board, a small roof and sides, but it is fully open in the front and in summer you have to rotate it to ensure that no direct sun gets onto the thermometer.

Shelters were build with larger roofs and sides, but still open to the front and the bottom, for example the Mountsouris and Wild screens. Sometimes even small houses or garden sheds were build, in the tropics with a thick thatched roof.

In the end, the [[Stevenson screen]] (Cotton Region Shelter) won the day. This screen is closed to all sides. It has double Louvre walls, double boards as roof and a board as bottom. (Early designs sometimes did not have a bottom.)

In the recent decades there is a move to Automatic Weather Stations (AWS), which do not have a normal (liquid in glass) thermometer, but an electrical resistance temperature sensor and is typically screened by multiple round plastic cones. These instruments are sometimes mechanically ventilated, reducing radiation errors during calm weather. Some countries have installed their automatic sensors in Stevenson screens to reduce the non-climatic change.


The photo on the left shows an open shelter for meteorological instruments at the edge of the school square of the primary school of La Rochelle, in 1910. On the right one sees the current situation, a Stevenson-like screen located closer to the ocean, along the Atlantic shore, in place named "Le bout blanc". Picture: Olivier Mestre, Meteo France, Toulouse, France.

Radiation errors

To understand when and where the temperature measurements have most bias, we need to understand how solar and heat radiation leads to measurement errors.

The temperature sensor should have the temperature of the air and should thus not be warmed or cooled by solar or heat radiation. The energy exchange between sensor and air due to ventilation should thus be large relative to the radiative exchanges. One of the reasons why temperature measurements outside are so difficult is that these are conflicting requirements: closing the screen for radiation will also limit the air flow. However, with a smart design, mechanical ventilation and small sensors this conflict can be partially resolved.

For North-wall observations direct solar radiation on the sensor was sometimes a problem during sunrise and sunset. In addition the sun may heat the wall below the thermometer and warm the rising air. Even for Stevenson screens some solar radiation still gets into the screen. Furthermore, the sun shining on the screen warms it, which can then warm the air flowing through the screen. For this reason it is important that the screen is regularly painted white and cleaned.

Scattered solar radiation (clouds, vegetation, surface) is important for older screens being open to the front. The open front also leads to a direct cooling of the sensor as it emits heat radiation. The net heat radiation flux is especially large when the back radiation of the atmosphere is low, thus when there are no clouds and the air is dry. Warm air can contain more humidity, thus these effects are generally also largest when it is cold.

Because older screens did not have a bottom, a hot surface below the screen could be a problem during the day and a cold surface during the night. This especially happens when the soil is dry and bare.

All these effects are most clearly seen when the wind is calm.

Concluding, we expect the cooling bias at night to be largest when the weather is calm, cloud free and the air is dry (cold). We also expect a warming bias during the day to be largest when the weather is calm and cloud free. In addition we can get a warm bias when the soil is dry and bare and in summer during sunrise and sunset.

Thus all things being equal, the radiation error is expected to be largest in sub-tropic, tropical and continental climates and small in maritime, moderate and cold climates.


Schematic drawing of the various factors that can lead to radiation errors.

Parallel measurements

We know how large these effects are from parallel measurements, where an old and new measurement set-up are compared side by side. Unfortunately, there are not that many of parallel measurements for the transition to Stevenson screens. Many parallel measurements in North-West Europe, a maritime, moderate or cold climate, where the effects are expected to be small of those are described in a wonderful review article by David Parker (1994) and he concludes that in the mid-latitudes the past warm bias will be smaller than 0.2°C. In the following, I will have a look at the parallel measurements outside of this region.

In the topics, the bias can be larger. Parker also describes two parallel measurements of a tropical thatched house with a Stevenson screen. One in India and one in Ceylon (Sri Lanka). They both have a bias of about 0.4°C. The bias naturally depends on the design, a comparison of a normal Stevenson screen with one with a thatched roof in Samoa shows almost no differences.


This picture shows three meteorological shelters next to each other in Murcia (Spain). The rightmost shelter is a replica of the Montsouri (French) screen, in use in Spain and many European countries in the late 19th century and early 20th century. In the middle, Stevenson screen equipped with automatic sensors. Leftmost, Stevenson screen equipped with conventional meteorological instruments.
Picture: Project SCREEN, Center for Climate Change, Universitat Rovira i Virgili, Spain.


Recently two beautiful studies were made with modern automatic equipment to study the influence of the screens. With automatic sensors you can make measurements every 10 minutes, which helps in understanding the reasons for the differences. In Spain they have build two replicas of the French screen used around 1900. One was installed in [[La Coruna]] (more Atlantic) and one in [[Murcia]] (more Mediterranean). They showed that the old measurements had a temperature bias of about 0.3°C; the Mediterranean location had, as expected, a somewhat larger bias than the Atlantic one.

The second modern study was in Austria, at the Mathematical Tower in Kremsmünster (depicted at the top of this post). This North-wall measurement was compared to a Stevenson screen (Böhm et al., 2010). It showed a temperature bias of about 0.2°C. The wall was oriented North-North-East and during sunrise in summer the sun could shine on the instrument.

For both the Spanish and the Austrian examples it should be noted that small modern sensors were used. It is possible that the radiation errors would have been larger had the original thermometers been used.

Comparing a Wild screen with a Stevenson screen at the astronomical observatory in [[Basel]], Switzerland, Renate Auchmann and Stefan Brönnimann (2012) found clear signs of radiation errors, but the annual mean temperature was somehow not biased.


Parallel measurement with a Wild screen and a Stevenson screen in Basel, Switzerland.
In [[Adelaide]], Australia, we have a beautiful long parallel measurement of the Glaisher (Greenwich) stand with a Stevenson screen (Cotton Region Shelter). It runs 61 complete years (1887-1947) and shows that the historical Glaisher stand recorded on average 0.2°C higher temperatures; see figure with annual cycle below. The negative bias in the minimum temperature at night is almost constant throughout the year, the positive bias is larger and strongest in summer. Radiation errors thus not only affect the mean, but also the size of the annual cycles. They will also affect the daily cycle, as well as the weather variability and extremes in the temperature record.

The exact size of the bias of this parallel measurement has a large uncertainty, it varies considerably from year to year and the data also shows clear inhomogeneities itself. For such old measurements, the exact measurement conditions are hard to ascertain.

The annual cycle of the temperature difference between a Glaisher stand and a Stevenson screen. For both the daily maximum and the daily minimum temperature. (Figure 1 from Nicholls et al. (1996)

Conclusions

Our understanding of the measurements and limited evidence from parallel measurements suggest that there is a bias of a few tenth of a Centigrade in observations made before the introduction of Stevenson screens. The [[Stevenson screen]]
was designed in 1864, most countries switched in the decades around 1900, but some countries did not switch until the 1960ies.

The last few decades there was a new transition to automatic weather stations (AWS). Some countries have installed the automatic probes in Stevenson screens, but most have installed single unit AWS with multiple plastic cones as screen. The smaller probe and mechanical ventilation could make the radiation errors smaller, but depending on the design possibly also more radiation gets into the screen and the maintenance may also be worse now that the instrument is no longer visited daily. An review article on this topic is still dearly missing.

Last month we have founded the Parallel Observations Science Team (POST) as part of the International Surface Temperature Initiative (ISTI) to gather and analyze parallel measurements and see how they affect the climate record. (Not only with respect to the mean, but also for changes in day and annual cycles, weather variability and weather extremes.) Theo Brandsma will lead our study on the transition to Stevenson screens and Enric Aguilar the transition from conventional observations to automatic weather stations. If you know of any dataset and/or want to collaborate please contact us.

Acknowledgement

With some colleagues I am working on a review paper on inhomogeneities in the distribution of daily data. This work, especially with Renate Auchmann, has greatly helped me understand radiation errors. Mistakes in this post are naturally my own. More on non-climatic changes in daily data later.



Further reading

A beautiful "must-read" article on temperature screens by Stephen Burt: What do we mean by ‘air temperature’? Measuring temperature is not as easy as you may think.

Just the facts, homogenization adjustments reduce global warming: The adjustments to the land surface temperature increase the trend, but the adjustments to the sea surface temperature decrease the trend.

Temperature bias from the village heat island

A database with parallel climate measurements describes the database we want to build with parallel measurements

A database with daily climate data for more reliable studies of changes in extreme weather gives somewhat more background

Statistical homogenisation for dummies

New article: Benchmarking homogenisation algorithms for monthly data

References

Auchmann, R., and S. Brönnimann, 2012: A physics-based correction model for homogenizing sub-daily temperature series. Journal Geophysical Research, 117, D17119, doi: 10.1029/2012JD018067.

Böhm, R., P.D. Jones, J. Hiebl, D. Frank, M. Brunetti, M.Maugeri, 2010: The early instrumental warm-bias: a solution for long central European temperature series 1760–2007. Climatic Change, 101, no. 1-2, pp 41-67, doi: 10.1007/s10584-009-9649-4.

Brunet, M., Asin, J., Sigró, J., Bañón, M., García, F., Aguilar, E., Palenzuela, J. E., Peterson, T. C. and Jones, P., 2011: The minimization of the screen bias from ancient Western Mediterranean air temperature records: an exploratory statistical analysis. International Journal Climatology, 31, pp, 1879–1895, doi:
10.1002/joc.2192.

Nicholls, N., R. Tapp, K. Burrows, D. Richards. Historical thermometer exposures in Australia. International Journal of Climatology, 16, pp. 705-710, doi: 10.1002/(SICI)1097-0088(199606)16:6<705::AID-JOC30>3.0.CO;2-S, 1996.

Parker, D. E., 1994: Effects of changing exposure of thermometers at land stations. International Journal of Climatology, 14, pp. 1–31, doi: 10.1002/joc.3370140102.

7 comments:

  1. Very nice and concise description of measurement bias due to radiation etc.

    I would only add two other issues not (clearly) mentioned.

    The first is snow on the ground. It strongly affects the amount of visible radiation inside the screen, which can make the measured temperature a degree or more warmer. This error is more prominent in sunny and calm places in deep valleys and basins and may even cause an error of 5 °C or so (my experience).

    The second issue is thermal inertia of a screen-thermometer system. Stevenson screen strongly reduces short-term temperature fluctuations, thus making daily measured minimum and maximum temperature comparable to ventillated modern designs.

    ReplyDelete
  2. Hi Gregor, good points. And it might be that with automatic weather stations the snow is whiter because no observer compacts and soils it.

    I wonder how many AWS have only single Louvre cones and thus are more sensitive to snow or hot or cold surfaces.

    ReplyDelete
  3. Great post, as usual. It's very interesting to see so much thought and effort put into having the best and most rigorous data.

    ReplyDelete
  4. It is always good to use both statistics and physics. Then you can have a look weather the statistical homogenization using neighbours finds about the same answer as the one you would physically expect.

    Especially nowadays for the homogenization of the temperature distribution of daily data, we need to understand the reasons for the non-climatic changes well. Otherwise it is hard to remove these complicated changes and to produce realistic validation datasets.

    ReplyDelete
  5. Great to hear about your "Parallel Observations Science Team" project! The more parallel measurements we can get, the better! :)

    By the way, have you read our brief 2 page review of the pre-Stevenson screen transition problem in our Surface Stations paper? http://oprj.net/articles/climate-science/11

    It was only a fairly brief discussion, since the focus of the paper was on the U.S. Surface Stations project results (i.e., modern screen "exposure"), but we felt the two subjects were similar enough to merit a comparison.

    The bit on the introduction of the Stevenson Screen is in Section 2.4 (p7-8 in the paper)

    We discussed several of the relevant studies we could find, including the Austrian and Spanish studies you mentioned.

    Unfortunately, we have some concerns over the representativeness of the Austrian study - the new station is in a high-walled garden and as a result seems to frequently be in the shade. It is quite possible this has itself introduced a non-climatic bias (possibly cooling?). If so, this would have biased the results of the Kremsmuenster study.

    We also identified several potential problems with the two Brunet et al. Spanish studies which we feel weren't adequately resolved by the authors, e.g., from Google Earth, both stations currently appear to be quite heavily urbanized and poorly exposed. Both of these factors could potentially have altered the apparent "screening bias" of the Montsouri shelters relative to the actual bias (whatever it was) which would have existed when the actual transition was being made in the late 19th/earth 20th Century.

    What do you think yourself?

    ReplyDelete
  6. Ronan, In discussions on the Watts et al. (2012) manuscripts I was sometimes tempted to cite your article as stating that all old measurements are in the worst Leroy quality class and that the siting had thus only gotten better. But it would have been purely rhetorical.

    Irony is best not used in a scientific paper. It seem logical that the last few decades where we have a dense climate network with good quality measurements, we trust the observations more than the proxies. While in the early instrumental period, the thermometers and screens had considerable problems because the measurement was not understood well yet. Maybe you agree with this, the "irony" suggests you do, while not being wiling to state so. It is a good custom in the literature to be clear about your conclusions. (You can be a bit vague when showing a specific paper/person wrong, but also then irony would not be a good stylistic tool.)

    I do not agree that the parallel measurement in Austria is biased because the Stevenson screen is in the shade. If that was the location of the Stevenson screen during past observations, that is the right location. A bigger problem is that it is not fully clear when the small solar screen was build into the North Wall screen. Both factors do make the extrapolation to other stations difficult. That is anyway difficult because the exact configuration, building materials and colour are likely important.

    (The internet is not very good at the moment or your figshare link to the Google Earth figure does not work.) Not sure whether I would see an UHI as a problem for the difference between the French screen and the Stevenson screen in Spain. If the air is just warmer, that would affect both measurements. What would be a problem if there were a large building on the North side of the open French screen that was not there before.

    Sorry for being such a contrarian, but on the photos I noticed that the grass in the circle where the instruments are standing is so nice and lush, whereas the surrounding is dry and bare. Asking about it, I found that they water the grass in the circle. That would make the radiation error via the hot ground a lot smaller. The new question now is when did they start with watering. If they always did, there would be no problem. I will try to find out, but would be surprised if people would have used a hand pump to water the ground around their screens in the distant past.

    ReplyDelete
  7. Now I finally could look at your Google Earth maps. I wonder if the locations are right. Especially in case of Murcia, I see a lot of agricultural land to the North, while your dot is in the middle of a building.

    You do see some building on the photos, which are taking in many directions, but none where I would fear to see an enhanced radiation error.

    Lo Corunna also seem to be the wrong location, but as your map does show a little green, I am less sure. It is hard to compare two such different perspectives.

    ReplyDelete

Comments are welcome, but comments without arguments may be deleted. Please try to remain on topic. (See also moderation page.)

I read every comment before publishing it. Spam comments are useless.

This comment box can be stretched for more space.